From the right cabinet

Game Console Repair

PlayStation, Xbox, Nintendo Switch and retro systems, for Greensboro, Winston-Salem and High Point. HDMI ports, overheating, disc drives and drifting sticks, repaired at board level so you keep your own console instead of getting somebody else's refurbished one back. Mail it in, drop it off, or book a house call. Every number below is a starting price.

Ports and power

HDMI port replacement, PS5 and Xbox Series X or S

Ripped or bent HDMI port on a PS5, PS5 Slim, Xbox Series X or Series S. The old port comes off and a new one goes on. Starts at $139. Microsoft's published out-of-warranty fee is a flat $299 and they send back a refurbished unit. Sony's out-of-warranty service is reported around $250 and is often a replacement rather than a repair, though that figure is secondary sourced and worth checking yourself. Either way you may not get your own console back.

from $139

HDMI port replacement, PS4 and Xbox One

Same job on a PS4, PS4 Slim, PS4 Pro, Xbox One, One S or One X. Starts at $89.

from $89

PS5 HDMI retimer chip replacement

Sometimes the port itself is fine and the retimer chip behind it is dead. Different chip, harder job, finer work. Starts at $199.

from $199

Console power supply replacement

Console that is dead at the wall or shuts itself down under load. Power supply replacement starting at $139.

from $139

No power, board-level diagnosis and repair

Console with no power, no video, or a beep code, where the power supply itself checks out. Every shop that publishes this publishes a range rather than a flat fee, because the fault is unknown until it is found. Starts at $179 and I quote the rest once I know what failed. The $65 diagnostic is credited in full toward the repair.

from $179

Cooling and cleaning

Console cleaning and thermal service

Three levels. $45 for a dust-out and fan clean without a full teardown. $85 for a full interior teardown and clean. $109 for the teardown plus fresh thermal paste and pads on an Xbox, a PS4 or a gaming PC.

from $45

PS5 liquid metal service

The PS5 uses liquid metal instead of thermal paste and it degrades and pumps out over time. Full teardown, clean, fresh liquid metal, new thermal pads, reassembly and a load test. Starts at $149. Liquid metal is electrically conductive, so it shorts a board if any of it goes where it should not, and that is what the price reflects.

from $149

Console fan replacement

Grinding, rattling or dead fan on a PS5, PS4 or Xbox. $109 labor plus the fan.

from $109

Disc drives

PS5 disc drive repair and realignment

Disc drive that will not take a disc, will not eject, or grinds. I repair and realign the original drive rather than swap it. PS5 disc drives are paired to the console board, and as far as I can establish a donor drive will not read discs without a re-pair path, so keeping your original drive in the console sidesteps the problem. If that changes I will say so.

from $109

Xbox disc drive repair or replacement

Xbox Series X, Xbox One, One S or One X optical drive that will not read, will not take a disc or grinds. Starts at $129. Xbox drives do not carry the pairing problem the PS5 has, so a replacement drive is a real option here.

from $129

Nintendo Switch

Nintendo Switch USB-C charge port

The USB-C port is desoldered and replaced, on original Switch, OLED or Lite. This is board-level work rather than a plug-in part, which is why it is priced like board work. Starts at $119.

from $119

Nintendo Switch screen

Cracked Switch screen or digitizer, original Switch, OLED or Lite. Starts at $149.

from $149

Nintendo Joy-Con rail and charge port

Broken Joy-Con rail, a Joy-Con that will not connect or charge, or a damaged charge contact. Starts at $89. On drift specifically, Nintendo repairs Joy-Con drift free of charge in most cases even out of warranty. Send it to them first. I am not going to charge you for something the manufacturer does for nothing.

from $89

Controllers

Controller stick module replacement

Stick drift fixed with a like-for-like module. $49 for one stick, $79 for both. The replacement is the same design as the one that just failed, so if you would rather not repeat this, read the next card.

from $49

Controller hall effect or TMR joystick upgrade

Drifting stick replaced with a hall effect or TMR module instead of the potentiometer design the controller shipped with. $89 for a DualSense, $99 for an Xbox controller, both sticks included, return shipping included. The stock module uses a wiper riding on a carbon track. Hall effect and TMR modules read position magnetically, so there is no wiper and no track. Different failure modes, and I am not making a claim about how long it lasts. This one travels well, mail it in from anywhere.

from $89

Controller USB-C charge port

DualSense or Xbox controller that will not charge or has a loose port. The port is desoldered and replaced. Starts at $79.

from $79

Retro systems

Retro console recap

Full capacitor replacement on retro hardware. NES, SNES, N64, GameCube, Genesis, Sega CD, Saturn, Dreamcast, Game Gear, PS1, PS2, original Xbox and the handhelds. Starts at $89 and moves with how many caps the board has.

from $89

Retro RGB and HDMI mod install

Install of RetroGEM, N64Digital, UltraHDMI, NESRGB, Tim Worthington and similar kits. $119 labor and up depending on the console and the mod. You buy the kit or I order it for you at cost plus handling.

from $119

Fees, hours and service area

Diagnostic

$65, credited in full toward the repair. Nothing is charged if I decline the job, refer it out, or cannot recover your data. If you get a quote and decide not to proceed, the $65 covers the bench time.

$65

House call

$149 covers the trip and the first hour on site, then $125 an hour. The radius is 25 miles from High Point 27265, which takes in all of Greensboro, Winston-Salem and High Point. Past 25 miles it is $1 a mile counted both ways, and I tell you that number before I leave.

from $149

Hours and service area

Mon-Fri, 10am-4pm, working out of High Point, NC 27265. Outside those hours by request for an added fee. I cover the Piedmont Triad, which is Greensboro, Winston-Salem and High Point, by mail-in, drop-off or house call.

Mon-Fri, 10am-4pm

How it works

1

Get it to me

Ship it in, drop it off, or book a house call. Include a controller if you can, it helps with testing. Start with a repair request.

2

$65 diagnostic

I test it, find the actual fault and send you a price before any work starts. The $65 is credited in full toward the repair.

3

Board-level repair

Microsoldering under the microscope where that is what the fault needs, rather than swapping the whole console.

4

Tested, then back to you

Load tested on a game before it goes back. Pick it up, I ship it back, or I return it on a house call.

Console down mid-season?

Mail it in, drop it off, or book a house call anywhere in the Triad. Questions? Email [email protected].

Start a repair →